Best Miter Saw In UK 2021 | Complete Buyer Guide |

If you think that finding the right miter saw to build something from a substance is hectic and difficult but more like finding your significant other?

Then, without further ado, proceed to read the entire article in order to avoid confusion.  If you’re doing a lot of furniture making or carpentry, purchasing miter saw is always a wise decision. Such power miter saw make awesome cuttings, make cuts directly across the width of the wood, and they sparkle when it comes to miter or bevel cuts. A miter cut creates another off point by slicing across the size of your panel at an edge. It is helpful for best miter saw for furniture making works and other things like making photo frames. Throughout these cuts, the saw blade is at a 90-degree to a board. On the other hand, the saw blade would be at an angular position for smooth cutting, leaving an angular “undercut”.

 So if slicing floor boards, moldings, closets, furnishings, or decorative trim, all kinds of cuts are commonly used. You can even simply change blade and use it as best miter saw blade for laminate flooring. In the wake of testing numerous miter saws and taking individual reviews of expert specialists and homeowners from the past one year, we finished up a rundown of the best miter saw 2021 that would manage you that which miter saw will be the best for you. 

Best Miter Saw

The best miter saw blade for trim can make short work of even calculated cuts, and it will do them efficiently and proficiently. In any case, there are some radical contrasts between miter saw models that you should know about before you pull the trigger and chop the opposition down to a solitary saw to add to your variety. 

Miter saw cutting blades extend in size from 7¼ crawls to 12 inches. Best budget miter saws can be a little more than 20 pounds or as overwhelming as 60+ pounds. There are numerous factors to consider, and it’s essential to guarantee that the best miter saw you pick can play out the undertakings you need. You can also use them alternately for home use, like cutting cardboards or in other little house chores, that’s why they are categorized as best miter saw for home use.  The accompanying nine reviews will think about a portion of our top choices. 

DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779)

The DEWALT DWS779 sliding compound miter saw is precision at it’s toughest, delivering accuracy and capacity for everyday jobsite use.. This miter saw is designed with a powerful 15 Amp, 3800 RPM motor that delivers extended power and durability. Tall sliding fences support 7-1/2-inch of crown nested and up to 2×14 dimensional lumbers at 90 degree and 2×10 at 45 degree. A cam lock miter handle with detent override delivers quick and accurate miter angles.


If you are looking for a reputable brand of power tools, you can go with Dewalt. It offers a sliding miter saw that provides decent performance for the user. The Dewalt DWS779 sliding miter saw is present in the 1st position in this article as it offers an outstanding balance between price and performance. You get a powerful 15 amp electric motor in this saw. These powers a 12-inch cutting blade that is one of the most extensive options out there compared with other options.

The DeWalt DWS779 is a superb option for those looking to purchase their very first miter saw and is very much the ideal saw to consider if you’re upgrading to a sliding compound miter saw. Its motor offers a high speed of 3800 RPM that can easily cut through even hard materials without any issues. You can use it to cut 6.75 inch deep objects without any problems. A great thing about the Dewalt miter saw is that it offers an excellent build quality along with a 3-year warranty. 

Suitable for professionals, the DeWalt DWS779 offers damn near every conceivable feature necessary to slice miters and bevels with precision effectively. DeWalt has fitted a robust 15-amp motor, and it has a lot less vibration than what you’ll find with other similar saws, especially given the powerful 15-amp engine it possesses. For safety features, you’ll get a transparent best miter saw blade guard that is pretty standard. 

First off, we like that this saw is pretty easy to set up. It does require some assembly, but it’s all relatively straightforward and easy to figure out. The manual is well written so that you can follow it pretty quickly. Even a newbie can figure it out. In addition, the precision in which the DeWalt DWS779 delivers such fine cut quality seems brilliantly balanced with the powerful 15-amp motor it harnesses. These results in a sliding miter saw that boasts outstanding accuracy and speed.

The slight vibration is a great feature, as well. Even professionals can get tired of the vibration given off by most saws. It is especially true if you are using the saw for long periods. Lower vibration isn’t a necessity, but it’s a nice feature to have.



Makita LS1040 10" Compound Miter Saw

Makita’s 10” Compound Miter Saw (model LS1040) combines power, performance, and ease of use for most common miter cuts including a range of applications including woodworking, cabinetry, deck building, framing, and more. 15 AMP Motor for Improved Performance The LS1040 has a dynamically balanced 15 AMP direct drive motor with 4,600 RPM for improved performance. The direct drive motor with soft start delivers smoother start-ups and constant power, with no belts to slip or replace.


If space-saving is crucial, we put forward that this could be one of the best 10 sliding compound miter saws 2021. Admittedly, it’s non-sliding, but unless you’re dealing with oversized materials, you don’t require this feature. Plus, the lack of this reduces its footprint significantly. Additionally, this is a lightweight machine — weighing just 27.3 pounds. Hence, if you need to relocate it after using precious bench space, you’re not going to break your back.

This model of Makita miter saw is a strong product. Your cutting abilities with the saw are endless, from cutting vertical crown molding at 6 5/8” and crown molding vertical baseboard at five ¼ “. Most of us are always looking for a miter saw that can cut 4x4s, and this miter saw can do just that! You will also make 12” 90-degree crosscuts with ease due to the sliding system.

You can do 0-48 degrees left, and right and miter cuts from 0-60 went and right when doing bevel cuts. Some miter saws may claim to be dual-angle, but they don’t cut to the same degree, both left and right. It is a heavy miter saw, so don’t plan on moving it many times a day on the worksite. It weighs 57.9 pounds, and the dimensions are 22.1 x 32.7 x 21.6 inches. The measurements are easy to read, so setting the saw for bevel cuts are easy to fix.



BOSCH Power Tools GCM12SD - 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade , Blue

The 12 in. Dual-bevel Glide Miter saw features the smooth cutting motion, accurate performance and space-saving design of Bosch Patented axial-glide system.


More intricate work like molding, trim, and frames are a breeze with a double bevel tool completed to be best miter saw for homeowners. A dual bevel miter saw, such as this version from Bosch, allows you to move sideways in both directions when cutting, opening up the opportunities for what you can do with it. A dust chute and vacuum outlet are also part of this package, so ingesting particles and clogs in the machine will be kept to a minimum. This monster knows no bounds, from delicate solid maple catching to railroad ties.

The Bosch Power Tools GCM12SD Sliding Glide Miter Saw offers a unique design. What’s more, it comes from a trusted name in power tool design and manufacturing. The first noticeable thing about this saw is that the plan isn’t all that traditional. It resembles a transformer more than the saws you are likely to have seen or used in the past. The glide system is a design in a class that is all on its own. This saw is a bit heavy, weighing in at 88 pounds, though with that weight usually comes a high degree of durability. The base is very stable, making it resistant to any tipping preventing damage to your materials. The motor is a 15-amp motor that delivers up to 3,800 RPMs at a no-load speed.

Aside from that, we also really like the 48-degree bevel capacity in both directions and the clear lower guard that can help with accurate cutting. Bosch can be another great option if you are looking for power tools as it offers a wide range of options. You can even find multiple sliding miter saws from Bosch out there. Bosch’s sliding miter saw is present in the 2nd position in this article as it can be a great option if you are looking for premium options. 

As per its name, it comes with a cutting blade with a diameter of 12 inches that makes it one of the most extensive options out there. It uses a powerful 15 amp electric motor to power this cutting blade for easy cutting. You get clean cuts while using this miter saw as it has a total of 60 teeth. A great thing about this miter saw is that it comes with an extended base design that offers a capacity of up to 14 inches to the user.



DEWALT Miter Saw, Single Bevel, Compound, 10-Inch, 15-Amp (DWS713)

The 10-inch Compound Miter Saw has a 15 Amp motor to deliver 5,000 rpm for extended power and durability. It features a stainless-steel miter detent plate and turn knob lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 4-1/2-inch of crown molding vertically nested. The lightweight design and built-in carry handle allow for great portability.


If you like DeWALT’s look and features, you can go up the range and purchase its laser line version or its dual power miter saw. This particular model has 14 positive stops, so you can feel confident in slicing the correct angle every time. The pre-attached blade is an elevated completing blade, which is redundant for timber and costs nearly $60 by itself. It’s a great touch by DeWALT.


DEWALT DW713 is also delivered ready to use out of the box. It comes with a sturdy build and proper calibration for accurate, effortless, and quality cuts. The 15amp motor is powerful and uniquely designed. The cam miter lock and stainless steel miter detent plates provide excellent precision and versatility with easy adjustments. DEWALT DW713 is a lightweight 10-inch miter saw with a built-in carry handle for portability.


This sliding compound miter saw sliding fences support crown molding and is suitable for various applications and cuts neatly through 2-6 inches thick dimensional lumber, thanks to the 45-degree bevel cut option.



Skil 10" Dual Bevel Sliding Miter Saw - MS6305-00

The 10” dual bevel sliding miter saw is powered by a 15-Amp motor that drives 4,800 RPM, delivering extended power and durability. This miter saw features a horizontal grip handle with a center located safety trigger for left- or right-handed use. The 9 detents on the stainless-steel miter plate and 11 miter locations allows for 50-degree cuts left or right, with 11 positive stop positions at commonly used angles.


The ten-inch double bevel slider miter is driven through the engine, which spins, providing plenty of force and reliability and best miter saw under 200. This miter saw has a diagonal system strengthening with a security prompt in the centre for left or right-handed usages. The alloy miter plate has nine locknuts and 11 miter places, which leads to deeper cuts slightly to both left and right with eleven favorable halt locations with frequently usage vantage points. The Shadow Lines of LED delivers higher accuracy and precision cuttings than conventional laser beams, whereas the lightweight or constructed carrying handle makes it portable and convenient.

The device has a corder miter latch button for replicable precision, reliability, and simple modifications. The towering slider standings can endorse 4-1/2″ base molding laterally and 6-1/4″ crown molding laterally enclosed. This miter saw is one of a kind and 2nd to none in terms of performance. Yet another incredible advantage of this technology is that it is reasonably priced despite its high quality. SKIL attempts to conquer the landlord’s market through price and quality if you haven’t heard.

UNLIKE STANDARD LASER BEAMS, the LED Shadow Line provides high accuracy cutbacks, whereas the simple design and constructed handle provide convenience and flexibility. The product comes furnished with a miter latch handle for continuous precision, solidness, and simple modifications. The short work buckle protects the materials quickly for secure cutters. In contrast, the sliding wall supports four to one and a half inches of foundation molding laterally and six and one-quarter inches of crown molding laterally resolved.



DEWALT 20V MAX 7-1/4-Inch Miter Saw, Tool Only, Cordless (DCS361B)

The DCS361B 20V MAX* 7 1/4-inch Sliding Miter Saw features an adjustment free cut line indication for better accuracy and visibility. Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Compact and lightweight construction for easy transporting and storage. Battery and charger sold separately.


Tools of Dewalt are some of the most recognizable in the marketplace, with distinctive black and yellow coloring adorning all their products. This cordless miter saw first appeared for sale back in 2015, and in the years since, it has become as popular as many other Dewalt tools. Being cordless, it requires no power supply, so, in effect, it could be used anywhere. It is powered by a Dewalt standard 20-volt battery, which is universally used on all their products.


This cordless miter saw can be used by all those who require cutting wood, ranging from new DIY enthusiasts to experienced and professional carpenters. For hobbyists, the great benefit will be the ability to cut wood more accurately, especially if the cuts need to be angled in any way.


For professionals, it is almost certainly essential and with the quality and reputation of Dewalt branded products, they can be sure that it will be reliable and operate very effectively for all the types of cuts they are likely to use. The Dewalt DCS361B cordless miter saw is sold as ‘Tool only’. You get the miter saw itself, and with it, you also receive a 7-1/4 inch diameter, carbide-tipped blade.


So that you can attach, remove, or change the blade, the appropriate wrench to do so is provided with the product. For holding your work piece, a material clamp also comes as part of the package. As you’d expect, a user’s manual is also included. Very importantly, you need to be aware that the battery and a charger for the battery are not included.


However, there could be a silver lining to this if you already own a Dewalt power tool. As the battery for their devices is universal, it means that you can use the battery you already have for that tool with this miter saw. Otherwise, you will need to purchase a battery and charger separately.



Metabo HPT 10-Inch Compound Miter Saw, Single Bevel, 15-Amp Motor, 0-52° Miter Angle Range, 0-45° Bevel Range, Large Table, 10" 24T TCT Miter Saw Blade (C10FCGS)

The Metabo HPT C10FCGS 10-inch Compound Miter Saw is lightweight for easier transport. The 15 amp motor generates a no-load speed of up to 5000 RPM for making crosscuts and miter cuts with ease. This miter saw offers a bevel range of 0-45 degrees to the left to provide clean and accurate bevel cuts.


Having a laser guide is a nice added feature when you’re relying on cuts to be precise and accurate. This dual-bevel miter saw from Metabo has that part sorted, which ensures reliability for all your tasks. It’s not a lightweight machine, but a wheeled stand will serve you well if you need to transport it. In case this saw is too big for your needs, Metabo does have a slightly smaller 10-inch version, too. “The laser is awesome, and it will cut pretty thick chunks of wood,” explained one customer, who also helpfully mentioned that this thing is enormous and recommended building a workbench for it.


If you only intend to use a miter saw on the event or for a single large project such as redesigning flooring, building furniture, or cutting trim, there is no need to spend lots of money upon that. 

Though there are no slider lines for cutting more comprehensive components, nor is there a light source for uptime, you get a saw with a 15-amp motor, a no-load maximum speed of five thousand rpm, a blade range of 0-45 degrees to the left, and a miter range of 0-52 degrees to the opposite side. A dust bag, a 10-inch 24-tooth saw blade, and a vice arrangement is included with the miter saw. That is indeed fairly much everything you’ll need to get started on specific DIY projects around the house or workbench.



Metabo HPT 10-Inch Compound Miter Saw | Laser Marker | 15-Amp Motor | Single Bevel | (C10FCH2S)

This 10″ Compound Miter Saw offers the ultimate in form and function. With its aggressive design, there is no doubt that this miter saw is designed for the professional. The C10FCH2S miter saw features a powerful 15 amp motor, vibration reducing horizontal handle, and laser marker system. At only 26. 5 lbs , look for this miter saw to be a go to for your job site.


Tapered artisans, drafters, and carvers who require precision, dependability, and flexibility on the job will appreciate the compound miter saw product. Besides benefits for local, the C10FCG is lighter than its predecessor weighing only 24.2 lbs. 

Besides accurate cutting of extensive work-piece, the C10FCG has a large extended flip guard that rises to 4 in. It has a big table with a former deputy clamping system that securely holds your work piece in place. Simple miter adjustments are possible, thanks to the thumb-actuated positive miter stops. An air cleaning connection is used to keep one’s work area clean and safe. It comes with a 5-year warranty from Metabo HPT



Evolution Power Tools R255SMS+ 10" Multi-Material Compound Sliding Miter Saw Plus

The R255SMS+ includes a Premium Japanese Tungsten-Carbide-Tipped blade with more teeth for a cleaner cut. Keep your work environment clean & safe! Attach the dust bag to catch debris that is fed through the rear dust port (attach for wood only). The R255SMS+ is very portable! The rear carry handle allows you to comfortably pick up and safely transport around the workshop or on site. 


The Evolution power tools R255SMS+ is an ultimate saw for any industry on the job site. It is a budget-friendly saw among the Evolution best miter saw reviews. What do you expect from a top-notch miter saw? Accuracy, power, reliability, stability or anything else? You will get all of them in this very miter saw. It comes with a compact design and can cut through most materials.

They saw multi-material cutting technology, whether hardwood, nail embedded wood, laminate, thin steel, mild steel, etc. This saw will go through all of them effortlessly. And the best part is, you don’t need to change the blade for cutting different materials; one BLADE is enough to tackle all of them. Accuracy is essential when it comes down to cutting work; this very machine gives you incredible accuracy. 

Moreover, it allows you to adjust the depth of cutting. It comes with a robust 15A hi-torque, optimized blade, and gearbox system that enhance both the motor and the blade life. Not to forget, if you pick a suitable knife, you can cut through ceramic and ornamental stones as well, that too, with complete accuracy. The latest Evolution saws are very modern looking with the black casing and orange coloring, which is no exception. It will look good set up in the garage and on-site. The top of the sliding mechanism has a nice tidy black color that looks good and robust and protects the sliding mechanism from damage.



Buying Guide

Depending on your need and price range, you have to select the right product. For this miter saw, you have to consider various factors to know whether it suits your cutting requirements perfectly or not. Take a look at these factors and consider them when you’re buying the miter saw.

What to consider? Recommendation:

Is it possible for a chop saw or a sliding miter saw to end up causing kickback?   Many of us have had the unsettling experience of having a sliding miter saw blade attach in a piece of wood; you feel a strange, violent shaking backward of the motor and blade unit in the centre of a cut. Such an event is unlikely to result in serious harm (offered a few basic logic safety rules are followed), but it can leave a person wanting to move on to it safer, such as sanding or sweeping floors. The majority about what you’ll read and hear about kickback, on the other hand, is about devices that have the true potential to toss a good-sized piece of material in the direction of the carpenter. This is a much more serious type of woodworking blunder.

  1. Power:

In general, the miter saw runs on an electric motor. The more powerful the engine, the more complicated and more complex projects it can handle. Look for a motor that has 15 amps and a rotation speed (no-load) of at least 3500 RPM. It is the most negligible value you have to consider while planning for professional usage of this saw.

  1. Saw Blade:

The size of a given sliding miter saw is based on its blade’s diameter. We mainly observe compact saws have seven ¼ inch blade, followed by 8 ½ inch blades, yet they are pretty rare. The sliding miter saws with 10 inches and 12 inches blades are pretty commonly available in the market. Since these sliding miter saws with 10-inches and 12-inches will make longer/wider cuts than their compact saws, so, consider the working material’s dimensions (like wood) to get the right saw blade of a sliding miter saw for your work.

  1. Cutting Speed:

Choosing a blade with a higher tooth count will aid you in a clean, effective, and smoother cut. Generally, a saw with a 12-inch blade diameter will have more teeth when compared with a blade with having a smaller size. But the main drawback is that a saw with a higher tooth count will slow down the cutting speed.

  1. Cutting Ability:

The cutting ability is essential to consider while purchasing the sliding miter saw. It means a saw should have a strong motor and a right blade size for cutting materials. Also, you should have the ability to cut any type of materials accurately, along with offering a variety of angles for proper cutting.

  1. Safety Features:

Using a saw is quite dangerous unless and until you follow the safety measures mentioned by the manufacturer while operating them. Have a look at some standard safety features that let you safely use/operate this saw.

  • Saw Guards –As the name implies, this safety feature will protect you from any unfortunate accidents while working with this saw.
  • Saw Base –The saw base is another safety feature used to operate the saw properly. Purchase a quality saw stand to assist this base. Working on a dedicated saw stand with a stable base will provide good-looking cuts. Check out for sliding base extensions, especially if using the saw for cutting longer work pieces frequently.
  • Electric Brake –With this safety feature, you can halt/stop the blade from spinning whenever needed. You can do it quickly, like within a couple of seconds. This safety feature will prevent you from accidents, as it stops the saw blade immediately.
  1. Blade Change:

One should have the ability to change the blade/module quickly to perfectly suit for cutting various types and thickness of the wood. For instance, a miter saw having a single nut blade change option will reduce the time required to change the blade.

  1. Dust Chutes:

A lot of fine wood dust is produced while cutting wood planks. But it is essential to keep the area clean to make an efficient and precise cutting. It won’t let the dust blow away all over the places and make it easy to clean afterwards. Some manufacturers designed a dust collection spot along with a miter saw to get rid of this issue.

While a few models offer an air blowing option, which helps maintain a clean cutting area and thereby let you cut precisely. But initially, it makes a mess by moving the dust into the air to clean the area. However, these dust chutes won’t come into your mind, unless and until it becomes a crucial factor and aids in proper cutting efficiency and various health reasons.

  1. Sliding Rails:

With this feature, you can quickly move the saw blade forward & backwards. The length of the rail track will determine the saw’s maximum cutting width of the wood. These sliding rails can be either a single sliding rail or four sliding rails. A saw with more sliding tracks will add complexity and needs to be more careful while operating, yet it offers smoother movement than a saw with a single sliding rail.

  1. Fence:

Looking to make repetitive cuts easily, you have to choose a fence having a cast-in scale. Also, these fences are textured that ensures your work piece sits securely and won’t quickly get slip when you are cutting the work piece.

  1. Laser Attachment:

With its gaining popularity, most models include this feature. Though the hobbyists or DIYers seem to like the laser attachment feature for accurate cuts, the professional won’t care about this feature. So, it is worth an added investment, especially for those who are not confident in their ability to make accurate cuts.

Difference between Fixed Miter Saw & Sliding Miter Saw:

Here we are distinguishing between a fixed miter saw and a sliding miter saw. Let’s see these two types of miter saws and select the one that suits perfectly for you.

  • Fixed Miter Saw:

It has been used for more than 50 years, which become one of the favorites to use in the workshops of professional builders and hobbyists. This versatile saw is used to produce bevel cuts, miter cuts, basic crosscuts and compound cuts. It is perfect for cutting a moderately-sized piece of wood/lumber, trims, crown moldings, and baseboards, in which the thickness of the work piece is as 6-inches.

It is easy to use, portable, compact, and affordable compared to its versatile sibling-like miter saw. All you need to do is drop the saw into the work piece to cut, while for a sliding miter saw, you have to pull the saw towards you by lowering it to the edge of the work piece and horizontally slide it back to cut the wood piece.

  • Sliding Miter Saw:

This saw will produce miter cuts, compound cuts, bevel cuts, and crosscuts. The sliding miter saws can reach up to 12-inches cutting clearance (up to 16-inches for larger ones), while fixed miter saws have only 6-inches cutting backing. This sliding miter saw is a must to use saw, significantly while frequently cutting a thicker piece of wood/lumber.

Though they are pretty expensive, it won’t be the best option to invest in this tool if you are not using it frequently. Or else it sits in the workshop collecting dust. These saws are bulky, as they occupy a lot of space in your workplace/garage. A few models are heavyweight, which makes it hard to move around.

If you fix to set on sliding miter saw, then simply check out our buying guide to get a clear idea of what to look for and how to choose the best sliding miter saw while purchasing in a hardware store or online.

Frequently Asked Questions:

  • What are the benefits of using this sliding miter saw?

With its sliding feature, this sliding miter saw is a highly functional and versatile saw than a regular non-sliding compound miter saw. It lets you move the blade back and forth quickly while cutting the wood piece. Thus, it allows you to increase the length of your cuts.

  • Do we need to pull or push the slider miter saw while using it?

This sliding miter saw is designed to cut the material on a push stroke. If you perform pulling, you will observe a climb cut, which, in turn, causes the blade to rise and chase after you. So, this won’t be the best to attempt pull stroke while looking for fine cuts.

  • Shall we use a miter saw to make straight cuts?

In general, an angle cut of 90° is termed a straight cut. You can use this miter saw whenever you want to make right-angled cuts across a board’s width. This miter saw is used to create angled cut or bevel cut, which can be made by cutting across the thickness of the panel. 

  • What is the difference between a miter saw and a table saw?

Generally, we use a table saw for straight cuttings, whereas the miter saw is used to make both angle cuts and straight cuts. A table saw is worth investing in when it comes to flooring projects and for projects that require you to make several minor cuts (or) to cut angles at lot. Whereas you can use a miter saw for bigger cuts like cutting woods in particular directions.

  • Shall we use circular saws rather than miter saws?

Ans: Of course, you can use a circular saw instead of a miter saw, but using a circular saw is not safe, mainly while operating it hand-free. The reason is that you can hold your hands at a better distance and can easily sustain better control over its operation. So, to use a circular saw, you need to set up a jig or straight edge. Also, you have to measure the angle before starting the cutting process.


If you want a saw for cutting all kinds of materials with high accuracy, then you can go with a sliding miter saw. And above, we have mentioned some of the best miter saw 2021 options in this article. These generally offer precise control while cutting anything due to their various control options. You can also find their significant features and options, along with a detailed buying guide. This has all of the substantial aspects and factors regarding sliding miter saws. As you would expect, all of these things can be pretty useful to choose the perfect sliding miter saw for you quickly. But if you are still confused and not able to buy one, you can simply go with RR Buildings recommendations. The experts run a great channel named “RR Buildings”

According to them, For those on a budget, the Skil 10″ Dual-Bevel Sliding Miter Saw – MS6305-00 can be a great option. Even though this is the cheapest option present in this article, it comes with a large cutting blade that is as good as other expensive options out there. Since this is a budget option, you only get warranty with it. Thankfully, you get an excellent build quality in it that is always great to have.

The  Dewalt DWS779 sliding miter saw  is the most durable and reliable option present in this article. Most of the other options out there come with a one year or a two-year warranty. But this one offers an excellent build quality along with a three-year warranty. It even offers equally good performance as you get a 15 amp electric motor that powers its 12-inch cutting blade. You also get an ergonomic design along with high precision controls.

You can also consider the Metabo HPT 10-Inch if you want a balance between price and performance. This saw comes with a potent electric motor that is rated at 15 amps. It powers a 10-inch blade for quickly cutting large-size objects using this saw. Its 3800 RPM electric motor can cut with sharp and clean cuts while used for cutting different materials. As Meta is a reputable brand of power tools, you also get a pretty good build quality along with a 3-year warranty in it.

Leave a Comment

Your email address will not be published. Required fields are marked *